Instagram Facebook Twitter LinkedIn
Are you interested?
Request a qoute
Mixing devices

Effective dissolution of ozone in water

Venturi injectors

Venturi injectors are differential pressure injectors with internal mixing vanes that create thousands of microbubbles, greatly increasing the surface area of ozone gas in contact with the liquid.

Venturi injectors are one of the most effective methods of dissolving ozone into water when the pressure and the flow of water are consistent over time.

Our Venturi injectors operate over a wide range of pressures and require only a minimal pressure differential between the inlet and outlet sides to initiate a vacuum at the suction port.

These injectors are very reliable with many years of expected service.

Model Gas flow Water flow Pressure PDF
Ozone injector I-287 0.25 – 3.50 l/min 1.10 – 5.25 l/min 0.34 – 9.65 bar Datasheet
Ozone injector I-384 0.25 – 8.50 l/min 2.50 – 12.6 l/min 0.34 – 9.65 bar Datasheet
Ozone injector I-484 0.25 – 12.3 l/min 3.10 – 23.5 l/min 0.34 – 9.65 bar Datasheet
Ozone injector I-584 0.55 – 18.9 l/min 7.30 – 39.0 l/min 0.34 – 9.65 bar Datasheet
Ozone injector I-684 0.50 – 18.9 l/min 11.0 – 57.5 l/min 0.34 – 8.28 bar Datasheet
Ozone injector I-878 0.50 – 59.9 l/min 15.1 – 73.1 l/min 0.34 – 9.65 bar Datasheet
Ozone injector I-978 0.50 – 56.6 l/min 17.0 – 87.1 l/min 0.34 – 9.65 bar Datasheet
Ozone injector I-1078 1 – 77.9 l/min 20.8 – 106 l/min 0.34 – 9.65 bar Datasheet
Ozone injector I-1583 1 – 208 l/min 40.5 – 209 l/min 0.34 – 9.65 bar Datasheet
Ozone injector I-1584 1 – 153 l/min 71.9 – 367 l/min 0.34 – 9.65 bar Datasheet
Ozone injector I-2081 5 – 453 l/min 133 – 591 l/min 0.34 – 8.28 bar Datasheet
Ozone injector I-3090 18.9 – 1107 l/min 287 – 1376 l/min 0.35 – 8.44 bar Datasheet
Ozone injector I-4091 10 – 2548 l/min 473 – 2192 l/min 0.34 – 6.89 bar Datasheet

Injector nozzles

Using a nozzle in combination with venturi injectors allows dynamic mixing under pressure, resulting in higher mass transfers and therefore a more thorough mixing of ozone with water, facilitating the delivery of gas to any depth. This considerably enhances the effectivity of our system performances.

Our injector nozzles provide:

  • Enhanced gas/liquid interface renewal
  • Dynamic mixing under pressure for greater mass transfer
  • Desired back pressure to the injector
  • Delivery of treatment gases to any depth
  • Compact design for trouble-free operation and ease of installation
  • Polypropylene (PP) construction for nozzles 3 inches and larger
  • Polyvinylidene fluoride (PVDF) construction for nozzles 2 inches and smaller
  • B16A wide range of models designed to match your application.
Model Gas flow PDF
Ozone nozzle N-12 28 – 64 l/min Datasheet
Ozone nozzle N-13 57 – 129 l/min Datasheet
Ozone nozzle N-22 189 – 424 l/min Datasheet
Ozone nozzle N-25 284 – 644 l/min Datasheet
Ozone nozzle N-45 1136 – 2555 l/min Datasheet